产品搜索
联系我们
公司:北京中航时代仪器设备有限公司
联系人:石磊
电话:400-166-9267
传真:86-010-80224846
手机:13699145010
地址:北京市房山区经济技术开发区1号
产品展示
当前位置:首页 > 产品展示 > 产品详细介绍

产品名称:绝缘材料的体积电阻和表面电阻测量仪器供应商

产品型号:

更新时间:2021-05-21

产品报价:

产品特点:)适用范围:适用于测量粉末、粉体、颗粒物、电子元器件、介质材料、电线电缆、防静电产品、如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值等绝缘性能的检验和电子电器产品的绝缘电阻测量。本仪器测量高电阻测微电流。

绝缘材料的体积电阻和表面电阻测量仪器供应商的详细资料:

绝缘材料的体积电阻和表面电阻测量仪器供应商

一、概况:(1)适用标准:GB/T 22042-2008《服装 防静电性能 表面电阻率试验方法》;EN 1149-1-1995 《防护服 静电性能 第1部分表面电阻检验方法和要求》;GB/T 1410-2006《固体绝缘材料体积电阻率和表面电阻率试验方法》(与标准IEC93-1980等效);FZ/T 64013-2008 《静电植绒毛绒》;SJ/10694-2006《电子产品制造与应用系统防静电检测通用规范》6.1及ASTM D257《绝缘材料的直流电阻或电导试验方法》要求制作。 GB/T 2439-2001《硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定》;GB/T 10581-2006 《绝缘材料在高温下电阻和电阻率的试验方法》 ;GB/T1692-2008 《硫化橡胶绝缘电阻率的测定》;GB/T 12703.4-2010 《纺织品 静电性能的评定第4部分:电阻率》

GB/T 10064-2006《测定固体绝缘材料绝缘电阻的试验方法》。

(2)适用范围:适用于测量粉末、粉体、颗粒物、电子元器件、介质材料、电线电缆、防静电产品、如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值等绝缘性能的检验和电子电器产品的绝缘电阻测量。本仪器测量高电阻测微电流。

(3)特点:采用四探针测量法、仪器体积小、重量轻、高稳定性,高准确度的数字高阻测量仪器。本仪器配不同的测量电极(夹具)可以测量不同材料 (固体、粉体或液体)的体积电阻率和表面电阻率或电导率及方阻。

(4)材料的导电性是用电阻率ρ(单位:欧·米)或电导率σ(单位:欧-1·米-1)来表示的。两者互为倒数,并且都与试样的尺寸无关,而只决定于材料的性质。工程上习惯将材料根据导电性质粗略地分为超导体、导体、半导体和绝缘体四类。

二、表面电率阻率/体积电阻率测试仪技术指标
1、电阻测量范围:0.01×104Ω ~1×1018Ω。

电 阻 率:1.0×104 ~ 2.0×1016 Ω-m;方块电阻:1.0×104 ~ 2.0×1012 Ω/□

2、液晶显示: 电阻率、方阻、压强、温度、电导率、电流电压、可输入测试样品数据(圆柱:直径,高度;方体:长*宽*高)单位可以切换(mm、cm、m)

3、内置测试电压:0-1000V任意可设定

4、 基本准确度:1%

5、使用环境: 温度:0℃~40℃,相对湿度<80%

6、机内测试电压: 10/50/100/250/500/1000V 任意切换

7、供电形式: AC 220V,50HZ,功耗约5W

8、测量模式:手动/自动量程。带PC测试软件(选购),USB通讯接口,软件界面同步显示、分析、保存和打印数据!

9、常用电极(夹具)装置有(选购):

A型:固体状三环电极装置;B型:粉末状加压装置  C型:棒状测量电极装置

Surface electrical resistivity ratio / Tester volume resistivity

一、概况:(1)适用标准:GB/T 22042-2008《服装 防静电性能 表面电阻率试验方法》;EN 1149-1-1995 《防护服 静电性能 第1部分表面电阻检验方法和要求》;GB/T 1410-2006《固体绝缘材料体积电阻率和表面电阻率试验方法》(与标准IEC93-1980等效);FZ/T 64013-2008 《静电植绒毛绒》;SJ/10694-2006《电子产品制造与应用系统防静电检测通用规范》6.1及ASTM D257《绝缘材料的直流电阻或电导试验方法》要求制作。 GB/T 2439-2001《硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定》;GB/T 10581-2006 《绝缘材料在高温下电阻和电阻率的试验方法》 ;GB/T1692-2008 《硫化橡胶绝缘电阻率的测定》;GB/T 12703.4-2010 《纺织品 静电性能的评定第4部分:电阻率》

One, overview: (1) standard: GB/T 22042-2008 "garment test methods for the prevention of electrostatic properties of surface resistivity"; EN 1149-1-1995 "protective clothing electrostatic properties of first part surface resistance test methods and requirements"; GB/T 1410-2006 "solid insulating material volume resistivity and surface resistivity test method" (international standard IEC93-1980 equivalent); FZ/T 64013-2008 "electrostatic flocking Plush"; SJ/10694-2006 "electronic product manufacturing and application of anti electrostatic detection system general specification 6.1" and ASTM D257 "DC resistance or conductance of insulating materials test method" requirement. GB/T 2439-2001 "rubber vulcanized or thermoplastic conductive properties and dissipative properties determination of resistivity of the" GB/T 10581-2006 "; insulating materials under high temperature resistance and resistivity test method" GB/T1692-2008 "; vulcanized rubber insulation resistivity measurement"; GB/T 12703.4-2010 "textile xerographic performance evaluation of fourth parts: the resistivity"

GB/T 10064-2006《测定固体绝缘材料绝缘电阻的试验方法》。

GB/T 10064-2006 "determination of solid insulation resistance of insulation materials test method".

(2)适用范围:适用于测量粉末、粉体、颗粒物、电子元器件、介质材料、电线电缆、防静电产品、如防静电鞋、防静电塑料橡胶制品、计算机房防静电活动地板等电阻值等绝缘性能的检验和电子电器产品的绝缘电阻测量。本仪器测量高电阻测微电流。

(2) the scope of application: suitable for measuring insulation resistance measurement of powder, powder, particles, electronic components, materials, wire and cable, anti-static products, such as anti-static shoes, anti-static plastic and rubber products, computer room activities of anti-static flooring, resistance and insulation performance test and electronic products. The instrument for measuring high resistance measuring current.

(3)特点:采用四探针测量法、仪器体积小、重量轻、高稳定性,高准确度的数字高阻测量仪器。本仪器配不同的测量电极(夹具)可以测量不同材料 (固体、粉体或液体)的体积电阻率和表面电阻率或电导率及方阻。

(3) features: the use of four probe measurement, the instrument has the advantages of small volume, light weight, high stability, high resistance measuring instrument with high accuracy. This instrument measuring electrode with different (fixture) can measure different materials (solid, powder or liquid) of the volume resistivity and surface resistivity or conductivity and resistance.

(4)材料的导电性是用电阻率ρ(单位:欧·米)或电导率σ(单位:欧-1·米-1)来表示的。两者互为倒数,并且都与试样的尺寸无关,而只决定于材料的性质。工程上习惯将材料根据导电性质粗略地分为超导体、导体、半导体和绝缘体四类。

(4) a conductive material with resistivity ρ (unit: O. m) or conductivity σ (unit: Euro -1 · m -1) to represent. Both reciprocal, and has nothing to do with the specimen size, and only depends on material properties. The project will be accustomed to materials based on conductive properties roughly divided into super conductor, conductor, semiconductor and insulator four

二、表面电率阻率/体积电阻率测试仪技术指标

Two, the surface electric resistivity rate / technical index of volume resistivity tester

1、电阻测量范围:0.01×104Ω ~1×1018Ω。

1, resistance measurement range: 0.01 × 104 ~ 1 × 1018 Ω.

电 阻 率:1.0×104 ~ 2.0×1016 Ω-m;方块电阻:1.0×104 ~ 2.0×1012 Ω/□

Electric resistance rate: 1 × 104 to 2 × 1016 Ω -m; square resistance: 1 × 104 to 2 × 1012 Ω / □

2、液晶显示: 电阻率、方阻、压强、温度、电导率、电流电压、可输入测试样品数据(圆柱:直径,高度;方体:长*宽*高)单位可以切换(mm、cm、m)

2, liquid crystal display: resistivity, resistance, pressure, temperature, conductivity, current and voltage, can input test sample data (cylinder diameter, height:; square: length * width * height) unit can switch (mm, cm, m)

3、内置测试电压:0-1000V任意可设定

3, the built-in test voltage: 0-1000V can be arbitrarily set

4、 基本准确度:1%

4, basic accuracy: 1%

5、使用环境: 温度:0℃~40℃,相对湿度<80%

5, the use of the environment: temperature: 0 ℃ ~ 40 ℃, relative humidity <80%

6、机内测试电压: 10/50/100/250/500/1000V 任意切换

6, the built-in test voltage: 10/50/100/250/500/1000V arbitrary switching

7、供电形式: AC 220V,50HZ,功耗约5W

7, the power supply form: AC 220V, 50HZ, power consumption is about 5W

8、测量模式:手动/自动量程。带PC测试软件(选购),USB通讯接口,软件界面同步显示、分析、保存和打印数据!

8, measurement mode: manual / automatic range. With PC test software (optional), USB communication interface, the interface of the software synchronous display, analysis, save and print data!

9、常用电极(夹具)装置有(选购):

9, common electrode (fixture) device (optional):

A型:固体状三环电极装置;B型:粉末状加压装置 C型:棒状测量电极装置

Type A: solid three electrode device; type B: powder compression device of C type: a rod-shaped measuring electrode device

The electrical properties of China aerotime and common instrument of insulating material

ZWN万能材料试验机

ZWN universal material testing machine

ZJC-10KV-200KV电压击穿试验仪

ZJC-10KV-200KV voltage breakdown tester

ZST-121体积表面电阻率测定仪

Determination of ZST-121 volume and surface resistivity instrument

ZTS-121碳素材料电阻率测试仪

ZTS-121 carbon material resistivity tester

ZST-122电线电缆导体半导体材料电阻率测试仪

Instrument cable conductor semiconductor material resistivity ZST-122

M-200橡胶塑料滑动摩擦试验机(国标,非国标,可定制)

M-200 rubber plastic sliding friction testing machine (GB, non standard, can be customized)

ZJD-A介电常数介质损耗测试仪(可测试固体液体)

ZJD-A dielectric loss tester (testing of solid liquid)

ZJD-B学校介电常数介质损耗测试仪

ZJD-B school special dielectric loss tester

ZJD-C高频介电常数介质损耗测试仪

ZJD-C high frequency dielectric loss tester

ZJD-50HZ-100HZ工频介电常数介质损耗测试仪

ZJD-50HZ-100HZ frequency dielectric loss tester

ZDH-20KV绝缘材料耐电弧性能试验仪/高电压小电流测试仪

Arc resistance tester / high voltage low current tester ZDH-20KV insulating material

ZWK-300A液显热变形维卡软化点温度测定仪

ZWK-300A liquid heat deformation temperature of VEKA softening point tester

ZWK-300B计算机控制热变形维卡温度试验机

VEKA ZWK-300B computer control thermal deformation temperature testing machine

ZWK-500计算机控制热变形维卡温度试验机

VEKA ZWK-500 computer control thermal deformation temperature testing machine

ZQYH-96塑料球压痕硬度计

ZQYH-96 plastic ball indentation hardness tester

ZRT-400Z熔体流动速率测定仪/熔融指数仪

ZRT-400Z melt flow rate meter / melt index apparatus

ZMD-A计算机控制马丁耐热试验仪

ZMD-A computer control Martin heat resistance tester

☆中航时代燃烧性能仪器

☆ China aerotime combustion performance instrument

ZRS-3水平垂直燃烧试验仪

ZRS-3 horizontal and vertical burning tester

ZDG-1000单根电线电缆垂直燃烧试验仪

ZDG-1000 vertical burning test instrument of single wire and cable

ZLD-600V漏电起痕试验仪

ZLD-600V tracking test apparatus

ZLD-6000V高压漏电起痕试验仪

ZLD-6000V high voltage tracking test apparatus

ZKR-A建材可燃性试验炉

ZKR-A building materials flammability test furnace

ZBR-B建材不燃性试验炉

ZBR-B building materials not combustion test furnace

ZZR-A汽车内饰材料阻燃性能试验机

Flame retardant properties of automotive interior materials testing machine ZZR-A

ZY-A针焰试验仪

ZY-A needle flame test apparatus

ZR-A灼热丝试验仪

ZR-A glow wire test apparatus

ZDR-C导热系数测定仪

Determination of ZDR-C thermal conductivity coefficient instrument

☆中航时代海绵泡沫检测仪器

☆ China aerotime sponge foam detecting instrument

ZYX-2000海绵泡沫压陷硬度测定仪

ZYX-2000 sponge foam indentation hardness tester

ZLQ-500海绵泡沫落球回弹仪

ZLQ-500 sponge foam ball rebound tester

ZPL-2000海绵泡沫疲劳冲击测定仪

ZPL-2000 sponge foam fatigue impact tester

ZLS-1000海绵拉伸强度试验机

ZLS-1000 sponge tensile strength testing machine

ZYS-200海绵压缩*变形试验机

Compression testing machine ZYS-200 sponge

ZQG-500海绵泡沫切割机

ZQG-500 sponge foam cutting machine

ZMD-A海绵密度测定仪

ZMD-A sponge density measuring instrument

ZYZS-C氧指数测定仪

ZYZS-C oxygen index tester

ZR-B海绵泡沫阻燃性能试验箱

Test box flame retardant sponge foam properties of ZR-B

☆中航时代冲击试验机系类

☆ China aerotime impact testing machine series

ZWD系类低温脆性试验机(单试样、多试样)

ZWD series of brittle - temperature testing machine (single specimen, multiple sample)

ZJZL-A简支梁冲击试验机(指针,数显)

ZJZL-A Charpy impact testing machine (pointer, digital display)

ZXBL-A悬臂梁冲击试验机(指针,数显)

ZXBL-A cantilever beam impact testing machine (pointer, digital display)

ZJX-A简支梁悬臂梁组合冲击试验机(指针,数显)

ZJX-A simply supported cantilever beam combination impact testing machine (pointer, digital display)

ZLC-2000落球冲击试验机

ZLC-2000 falling ball impact test machine

ZLB-30管材落镖冲击试验机

ZLB-30 pipe falling dart impact tester

BCM-03摆锤薄膜冲击试验机

Pendulum impact testing machine of BCM-03 thin films

ZJS-300A金属摆锤冲击试验机

ZJS-300A metal pendulum impact testing machine

ZJS-300B全自动低温冲击试验机

ZJS-300B automatic temperature impact test machine

☆中航时代制样机系类

☆ China aerotime system prototype system

ZWN-A万能制样机

The ZWN-A universal machine

ZQK-A手动缺口制样机

ZQK-A manual gap system prototype

ZQK-B自动缺口制样机

ZQK-B automatic gap system prototype

ZYL-A手动哑铃型制样机

ZYL-A manual dumbbell system prototype

ZQK-B自动哑铃型制样机

ZQK-B automatic dumbbell system prototype

冲片机(气动、液压)

Punching machine (pneumatic, hydraulic)

☆中航时代环境试验箱系类

☆ China aerotime environmental test box series

ZJB-C高低温交变试验箱

ZJB-C alternating high and low temperature test box

ZQH-C人工气候箱

ZQH-C artificial climate box

ZLH-A老化试验箱

ZLH-A aging test box

ZWS-02高低温试验箱

ZWS-02 high low temperature test box

ZYZS-C氧指数测定仪

ZYZS-C oxygen index tester

☆售后服务

☆ after sale service

一、安装调试:协助试验机的安装,负责试验机的运输、调试。

A, installation debugging: assist testing machine installation, transportation, commissioning test machine.

二、验收标准:试验机按订货技术附件进行验收。终验收在买方进行,对用户提供的试样进行试验,并提供测试报告。

Two, acceptance criteria: testing machine for acceptance according to the order of the technical annex. Final acceptance in the buyer, sample provides to the user testing, and provide the test report.

三、培训:安装调试同时,在仪器操作现场一次性免费培训操作人员2-3名,该操作人员应是由需方选派的长期稳定的员工,培训后能够对设备基本原理、软件使用、操作、维护事项理解和应用,使人员能够独立操作设备对样品进行检测、分析,同时能进行基本的维护。

Three, training: installation at the same time, the instrument operation on-site one-time free training 2-3, the operating personnel shall be appointed by the long-term stability of the staff, training to basic principle, software use, operation, maintenance and application of understanding, so that workers can operate independently equipment to detect samples, analysis, at the same time can carry out basic maintenance.

四、软件升级:终生免费提供新版本控制软件。

Four, software upgrade: free lifetime provides new version control software.

五、保修:

Five, the warranty:

1、设备保修两年,终身售后服务,一年内非人为损坏的零部件免费更换,保修期内接到用户邀请后, zui迟响应时间为2小时内,在与用户确认故障后,我公司会在48小时内派工程师到达现场进行免费服务,尽快查清故障所在位置和故障原因,并向用户及时报告故障的原因和排除办法 。

1, equipment warranty of two years, lifetime after sale service, within one year of the non-human damage parts replaced free of charge, the warranty period the user received the invitation, but the response time is 2 hours, with user confirmation after a failure, I will send engineers arrived at the scene for free within 48 hours of service, find out the fault location and the fault reason as soon as possible, and to users timely report failures and troubleshooting.

2、保修期内人为损坏的零部件按采购(加工)价格收费更换。

2, the warranty period of man-made damaged parts procurement according to the price of replacement (processing).

3、保修期外继续为用户提供优质技术服务,在接到用户维修邀请后3天内派工程师到达用户现场进行维修。并享有优惠购买零配件的待遇。

3, the warranty period to continue to provide high-quality technical services for the users, to invite users to repair within 3 days after the arrival of the user site to send engineers to repair. And enjoy the preferential purchase of spare parts.

4、传感器过载及整机电路超压损坏不在保修范围内。

4, the sensor and the circuit overload overpressure damage not covered under warranty.

六、售后管理:

Six, customer service management:

我公司实现计算机化管理,实行客户定期回访制度,定期复查设备的工作情况,定期指导用户对设备进行保养和检测,以便设备正常运转,跟踪客户的设备使用情况,以便及时对设备进行维护。

Our company to realize the computer management, carry out customer regular ephone return visit system, work regular examination equipment, regular ephone guide users to maintain and test the equipment, so that the normal operation of equipment, track customer equipment usage, so that timely equipment for maintenance.

 如果你对绝缘材料的体积电阻和表面电阻测量仪器供应商感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
扫一扫访问手机站扫一扫访问手机站