产品搜索
联系我们
公司:北京中航时代仪器设备有限公司
联系人:石磊
电话:400-166-9267
传真:86-010-80224846
手机:13699145010
地址:北京市房山区经济技术开发区1号
产品展示
当前位置:首页 > 产品展示 > 产品详细介绍

产品名称:绝缘漆介电击穿强度测试/耐电压击穿试验机

产品型号:

更新时间:2018-06-05

产品报价:

产品特点:绝缘漆介电击穿强度测试/耐电压击穿试验机主要适用于固体绝缘材料(如:塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质)在工频电压或直流电压下击穿强度和耐电压的测试。

绝缘漆介电击穿强度测试/耐电压击穿试验机的详细资料:

产品名称:电压击穿试验仪 
产品型号:ZJC-50KV
控制方式:微机控制
满足标准:GB1408-2006 绝缘材料电气强度试验方法 
          GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
          GB/T3333 电缆纸工频电压击穿试验方法
          HG/T 3330绝缘漆漆膜击穿强度测定法
          GB12656 电容器纸工频电压击穿试验方法
          ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.
一、电压击穿试验仪 ,适用范围及功能
绝缘漆介电击穿强度测试/耐电压击穿试验机主要适用于固体绝缘材料(如:塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质)在工频电压或直流电压下击穿强度和耐电压的测试。
电压击穿试验仪,由电脑控制,通过我公司自主研发的全新智能数字集成电路系统与软件控制系统两部分来完成,使升压速率真正做到匀速、准确,并能够准确测出漏电电流的数据。
可实时动态绘制试验曲线,显示试验数据,判断准确,并可保存,分析,修改,打印试验数据。

1、绝缘漆介电击穿强度测试/耐电压击穿试验机在试验过程中可对升压击穿过程绘制实时曲线,每次试验的升压曲线都由不同颜色构成,试验结束后可叠加对比材料的试验数据重复性。
2、可以随时调取当前及历史试验数据进行查看,编辑及修改实验结果。
3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
4、试验过程中,可随时通过软件决定本次试验是否有效,方便筛选试验结果。
5、可对软件设置密码,生成密码保护,做到专机专人操作,避免无关人员误操作。
6、 可对试验结果编辑修改后打印,方便操作 更加人性化。
7、可对一组试验中曲线数据的试验结果是否进行人为选定 。
8、本仪器采用先进的无触点原件匀速调压方式,淘汰同类产品中机械传动升压方式。
电压击穿试验仪,设备安全说明:

1、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

2、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

3、接地要求: 仪器需要单独接地,接地附合国家标准要求,金属棒深埋地下至少要1.5米以下。

4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。
二、电压击穿试验仪 ,技术要求:
01、输入电压: 交流 220 V
02、输出电压: 交流 0--50 KV ; 
               直流 0—50 KV
03、电器容量: 3KVA
04、高压分级: 0-10KV,0--50KV,
05、升压速率: 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  5000V/S 等
              (备注:满足标准要求并可以根据用户需求设定不同的升压速率)
06、试验方式:
           直流试验:1、匀速升压  2、梯度升压 3、耐压试验 
           交流试验:1、匀速升压 2、梯度升压 3、耐压试验
07、电压击穿试验仪 ,试验介质:空气,试验油
08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。
09、采用智能集成电路进行匀速升压。
10、支持短时间内短路试验要求。
11、电压试验精度: ≤ 1%。
12、试验电压连续可调: 0--50KV。
13、电流可采集到mA级。
14、出具国家一级计量单位校准检定证书或出具客户指定计量单位的证书。
15、电源:220V±10%的单相交流电压和50Hz±1%的频率。
16、电流电压稳定度: 外界电源电压波动10%时

三、 安全保护

电压击穿试试验仪器,电路保护控制:
(1)超压保护 (2)过流保护 (3)短路保护(4)漏电保护 (5)软件误操作保护

   高压输入回路断电保护控制:

   (1)总电源开关        (2)调压器复位开关 (3)高压断电开关
        (4)试验箱门安全开关 (5)高压回路开关    (6)漏电保护开关

四、主要配置
标准配置
序号 名称 配置 备注 
01 试验主机 一台   
02 控制装置 一套   
03 试验电极 二套(国标1408.1)   
04 试验油箱 二只   
05 放电系统 一套   
06 控制系统 一套   
07 数据采集系统 一套   
08 试验软件 一套 光盘 
09 计算机 一套 品牌 
10 喷墨打印机 一台 品牌 
11 产品使用说明书 一份   
12 计量证书 一份   
13 产品合格证 一份  


Dielectric breakdown voltage tester, dielectric strength tester, voltage tester, insulation breakdown voltage tester, high voltage breakdown strength tester of dielectric breakdown strength tester, dielectric strength tester
Product Name: voltage breakdown testing instrument
Product type: BDJC-50KV
Control: microcomputer control
Meet the standards: GB1408-2006 electrical strength of insulating materials - Test methods
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and dielectric strength test
GB/T3333 cable paper at power frequency voltage breakdown test method
HG/T 3330 insulating varnish films - Determination of electrical breakdown strength
GB12656 capacitor voltage breakdown test method
ASTM D149 of solid electrical insulating materials at commercial power frequencies of dielectric breakdown voltage and dielectric strength test methods.
One, the voltage breakdown testing instrument, the applicable scope and the function
Voltage breakdown testing instrument, mainly applicable to solid insulation materials ( such as: plastic, rubber, thin film, resin, mica, ceramic, glass, insulating paint and other media) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Voltage breakdown testing instrument, controlled by a computer, through my company independent research and development of new inligent digital integrated circuit and software control system two parts to complete, so that the pressure rate truly uniform, accurate, and can accuray measure the leakage current data.
Real time dynamic drawing test curve, display test data, the judgment is accurate, and can be preserved, analysis, modification, print the test data.
In 1, the instrument in the test process can boost the breakdown process in real time curve drawing, each test boost curve by different color, after testing can be superimposed contrast material testing data repeatability.
2, may at any time to obtain the current and historical test data to view, edit and modify the experimental results.
In 3, during the test can be modified at any time test conditions and storage path and automatic storage test results.
In 4, during the test, may at any time through the software determines the test is effective, convenient screening test results.
In 5, the software set a password, password generation protection, do special person operation, to avoid irrelevant personnel misoperation.
In 6, the test results edited print, convenient and more user-friendly operation.
In 7, of a group of test curve data of the test results are artificially selected.
In 8, the instrument adopts the advanced contactless original uniform pressure, elimination of similar products in the mechanical drive boosting mode.
Two, voltage breakdown testing instrument, technical requirements:
In 01, the input voltage: AC 220 V
In 02, the output voltage: AC 0--50 KV;
DC 0 - 50 KV
03, electrical capacity: 3KVA
In 04, high grade: 0-10KV, 0--50KV,
In 05, 100V/S 200V/S 500 V/S pressure rate: 1000 V/S 2000V/S 5000V/S
( Note: meet the standard requirements and can be based on user needs to set different pressurization rate )
06, test method:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, voltage breakdown testing instrument, test media: air, test oil
In 08, the installation of high sensitivity over current protection device to ensure that the sample breakdown in 0.05S to cut off the power supply.
09, adopts an inligent integrated circuit speed boost.
10, support a short time short-circuit test requirements.
11, voltage test accuracy:≤ 1%.
In 12, the test voltage is continuous and adjustable: 0--50KV.
13, the current can be collected to level mA.
14, issued by the country one class unit of measurement calibration verification certificate issued or customers designated units of measurement certificate.
15, power: 220V ± 10% single-phase AC voltage and 50Hz±1% frequencies.
16, current and voltage stability: the external power supply voltage fluctuation 10%
Three, security protection
Voltage breakdown testing instrument, circuit protection control:
( 1) the overpressure protection ( 2) over-current protection ( 3) short circuit protection ( 4) ( 5) software leakage protection misoperation
High voltage input circuit protection control:
( 1) the total power switch ( 2) regulator reset switch ( 3 ) high voltage disconnecting switch
( 4) test box door safety switch ( 5) high voltage circuit switch ( 6) leakage protection switch
In four, the main configuration
Standard configuration
Name configuration notes
01 experimental hosts
Control device 02 set
03 the test electrode two ( GB 1408.1 )
04 test tank two
The 05 discharge system one set
06 control system
07 data collection system
The 08 test a set of Software CD
09 computer of a brand
The 10 one ink-jet printer brand
11 using a manual
A 12 measurement certificate
13 certificate of product a
In four, a voltage breakdown testing instrument, equipment safety instructions:
1, equipment to install a separate protective ground. Grounding protection ground, mostly reduce the sample breakdown when the surrounding the strong electromagnetic interference. Also avoid control computer control.
In 2, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
3, grounding requirements: instruments require a separate grounding, grounding of a national standard requirements, metal rods buried at least 1.5 meters below.
In 4, the test equipment is provided with a number of circuit protection measures, are: over-current protection, under-voltage protection, leakage protection, short-circuit protection, DC test discharge alarm.
Five, voltage breakdown testing instrument of conventional models for:

 如果你对绝缘漆介电击穿强度测试/耐电压击穿试验机感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
扫一扫访问手机站扫一扫访问手机站