咨询电话:13699145010
Products产品中心
首页 > 产品中心 > 电压击穿试验仪 > 工频电压击穿测试仪 > 5万伏HG/T 3330电压击穿强度试验仪绝缘漆漆膜

HG/T 3330电压击穿强度试验仪绝缘漆漆膜

简要描述:主要适用于固体绝缘材料如:树脂和胶、浸渍纤维制品,塑料复合制品、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质在工频电压或直流电压下击穿强度和耐电压时间的测试。

  • 产品型号:5万伏
  • 厂商性质:生产厂家
  • 更新时间:2024-01-30
  • 访  问  量:1218

详细介绍

品牌AIRTIMES/中航时代

一、主要适用范围及功能
符合GB/T1695-2005硫化橡胶工频电压击穿强度和耐电压强度试验GB/T 1408-2006 绝缘材料电气强度试验方法 GB/T3333 电缆纸工频电压击穿试验方法 HG/T 3330绝缘漆漆膜击穿强度测定法 GB12656 电容器纸工频电压击穿试验方法及ASTM D149 标准要求.主要适用于固体绝缘材料如:树脂和胶、浸渍纤维制品,塑料复合制品、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质在工频电压或直流电压下击穿强度和耐电压时间的测试。

二、软件程序控制功能:
1.该设备试验过程中可动态绘制出试验曲线,试验的曲线可以多种颜色叠加对比。
2.可对试验数据进行编辑修改,灵活适用;
3.试验条件及测试结果等数据可自动存储;
4.试验报告格式灵活可变,适用于不同用户的不同要求。 
5.可对一组试验中曲线数据的有效与否进行人为选定。
6.试验结果数据可导入EXECL。

三、设备安全保护功能:
1、设备要安装单独的保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
2、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。
3、增配试验手动放电装置,随主机为一体化,当直流试验过程中突然断电,可采用手动放电棒进行放电,保证试验人员的人身安全。
4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电保护等。

四、主要技术要求:
01、输入电压: 220V
02、输出电压: 交流 0--50 KV ; 
03、电器容量: 5KVA
04、高压分级: 0--5KV; 0-10KV; 0--20KV;0--50KV;
05、升压速率: 10-5000 V/S(可以根据用户需求设定不同的升压速率)
06、试验方式:    直流试验:1、匀速升压  2、梯度升压  3、耐压试验 
    交流试验:1、匀速升压  2、梯度升压  3、耐压试验
07、安装灵敏度较高的过电流保护装置保证试样击穿时在0.1S内切断电源
08、采用先进的无触点原件匀速调压方式。
09、支持短时间内短路试验要求。
10、电极规格:¢25mm  两个   片材电极 ¢75mm一个(可按客户需求生产)
11、主机尺寸:长宽高900*800*1500mm
12、操作台尺寸:长宽高900*700*1500mm
13、防护罩材质:白色透明有机玻璃
14、油槽尺寸:长宽高100*80*80
15、设备重量:约100KG

五、设备主要配置
主机一台
试验装置一套
控制系统一套
数据采集系统一套
试验用电极 ¢25mm两个,¢75mm一个
试验油箱一套
放电棒一支
试验用软件一套
品牌计算机一套
打印机一台
使用说明书一份

六、型号可分为

ZJC-20KV

ZJC-50KV

ZJC-100KV

ZJC-150KV

One, the main scope and function

符合GB/T1695-2005硫化橡胶工频电压击穿强度和耐电压强度试验GB/T 1408-2006 绝缘材料电气强度试验方法 GB/T3333 电缆纸工频电压击穿试验方法 HG/T 3330绝缘漆漆膜击穿强度测定法 GB12656 电容器纸工频电压击穿试验方法及ASTM D149 标准要求.主要适用于固体绝缘材料如:树脂和胶、浸渍纤维制品,塑料复合制品、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质在工频电压或直流电压下击穿强度和耐电压时间的测试。

In accordance with GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength and voltage resistance test GB/T intensity 1408-2006 insulation test methods for electrical strength material GB/T3333 cable paper power frequency voltage breakdown test method HG/T 3330 insulating paint breakdown strength determination method of GB12656 capacitor paper power frequency voltage test method for breakdown and ASTM D149 standard. Mainly applicable to solid insulating materials such as: resin and rubber, impregnated fiber products, plastic products, film, resin, mica, ceramic, glass, insulating paint and other media in the frequency of the voltage or DC voltage breakdown strength and voltage withstand the test of time.

二、软件程序控制功能:

Two, the software program control function:

1.该设备试验过程中可动态绘制出试验曲线,试验的曲线可以多种颜色叠加对比。

1 the equipment during the test can be dynamically draw the test curve, the curve can be a variety of color overlay test comparison.

2.可对试验数据进行编辑修改,灵活适用;

2 can be edited on the test data, flexible application;

3.试验条件及测试结果等数据可自动存储;

3 the test conditions and results of the test data automatic storage;

4.试验报告格式灵活可变,适用于不同用户的不同要求。

The 4 test report format flexible, suitable for different requirements of different users.

5.可对一组试验中曲线数据的有效与否进行人为选定。

5 the curve of a group of test data is effective or not artificially selected.

6.试验结果数据可导入EXECL。

6 test results data can be imported into EXECL.

三、设备安全保护功能:

Three, equipment safety protection function:

1、设备要安装单独的保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

1, equipment to install a separate protective ground, mainly is the strong electromagnetic interference to reduce the sample breakdown when the surrounding the. Also avoid control computer control.

2、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注:因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。

2, DC discharge alarm function: the equipment finished DC test, when opening the door will automatically alarm test device, discharge device discharge until use on the device after the alarm will be automatically cancelled. (Note: because the DC test and not put electricity danger to personal safety, can not directly take electrode, a reminder to use staff in order to avoid personal injury) Adult discharge.

3、增配试验手动放电装置,随主机为一体化,当直流试验过程中突然断电,可采用手动放电棒进行放电,保证试验人员的人身安全。

3, with the test manual discharging device, with the host for the integration, when sudden power DC test process, can be manually discharging rod discharge test, to ensure personal safety.

4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电保护等。

Circuit 4, the test equipment is provided with a number of protective measures, mainly include: over current protection, under voltage protection, leakage protection, short-circuit protection, DC discharge protection etc..

四、主要技术要求:

Four, the main technical requirements:

01、输入电压: 220V

01, the input voltage: 220V

02、输出电压: 交流 0--50 KV ;

02, the output voltage: AC 0--50 KV;

03、电器容量: 5KVA

03, electrical capacity: 5KVA

04、高压分级: 0--5KV; 0-10KV; 0--20KV;0--50KV;

04, high grade: 0--5KV; 0-10KV; 0--20KV; 0--50KV;

05、升压速率: 10-5000 V/S(可以根据用户需求设定不同的升压速率)

05, the rate of pressure rise: 10-5000 V/S (can be set to boost rates of different according to the user demand)

06、试验方式: 直流试验:1、匀速升压 2、梯度升压 3、耐压试验

06, test mode: DC test: 1, 2, 3 speed boost pressure gradient, pressure test

交流试验:1、匀速升压 2、梯度升压 3、耐压试验

AC test: 1, 2, 3 speed boost pressure gradient, pressure test

07、安装灵敏度较高的过电流保护装置保证试样击穿时在0.1S内切断电源

Over current protection device 07, the installation of high sensitivity to cut off the power supply to ensure the sample breakdown in 0.1S

08、采用先进的无触点原件匀速调压方式。

08, the use of advanced contactless original uniform pressure.

09、支持短时间内短路试验要求。

09, support for a short time short-circuit test requirements.

10、电极规格:¢25mm 两个 片材电极 ¢75mm一个(可按客户需求生产)

10, the electrode specifications: - 25mm two - sheet electrode 75mm a (can be produced according to customer requirements)

11、主机尺寸:长宽高900*800*1500mm

11, host size: length width height 900*800*1500mm

12、操作台尺寸:长宽高900*700*1500mm

12, operation table size: 900*700*1500mm long width height

13、防护罩材质:白色透明有机玻璃

13, the protective cover material: white transparent organic glass

14、油槽尺寸:长宽高100*80*80

14, the oil groove dimensions: length width height 100*80*80

15、设备重量:约100KG

15, weight: about 100KG

五、设备主要配置

The main configuration, equipment five

主机一台

Host a

试验装置一套

An experimental device

控制系统一套

A set of control system

数据采集系统一套

Data collection system

试验用电极 ¢25mm两个,¢75mm一个

The test electrode for 25mm - two, 75mm - A

试验油箱一套

A set of test tank

放电棒一支

Discharge rod a

试验用软件一套

A set of test software

品牌计算机一套

A set of brand computer

打印机一台

Printer a

使用说明书一份

Using a manual

六、型号可分为

Six, models can be divided into

ZJC-20KV

ZJC-20KV

ZJC-50KV

ZJC-50KV

ZJC-100KV

ZJC-100KV

ZJC-150KV

ZJC-150KV

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
北京中航时代仪器设备有限公司
  • 联系人:石磊
  • 地址:北京市房山区经济技术开发区1号
  • 邮箱:zhsdyq@163.com
  • 传真:86-010-80224846
关注我们

欢迎您关注我们的微信公众号了解更多信息

扫一扫
关注我们
版权所有 © 2024 北京中航时代仪器设备有限公司 All Rights Reserved    备案号:京ICP备14029093号-1    sitemap.xml
管理登陆    技术支持:化工仪器网